Farades low

 FARADES LOW

Any change in the magnetic environment of a coil of wire will cause a voltage (emf) to be "induced" in the coil. No matter how the change is produced, the voltage will be generated. The change could be produced by changing the magnetic field strength, moving a magnet toward or away from the coil, moving the coil into or out of the magnetic field, rotating the coil relative to the magnet, etc.



Faraday's law is a fundamental relationship which comes from Maxwell's equations. It serves as a succinct summary of the ways a voltage (or emf) may be generated by a changing magnetic environment. The induced emf in a coil is equal to the negative of the rate of change of magnetic flux times the number of turns in the coil. It involves the interaction of charge with magnetic field. 


Comments

Post a Comment

Popular posts from this blog

How to fast charge anymobile

Image
  You can reduce the charging time of the phone by 20%  It doesn't have its fast charging battery.  It often supports fast charging of the phone, but it does not charge fast.  You can eliminate this charging problem by changing one of the phone's settings.  Changing this setting will reduce the charging time by 20%.  The phone has a secret setting  The setting associated with fast charging is a secret in the phone.  This setting is in the developer option of the phone.  To apply this setting, first go to the phone's Settings and go to 'About phone'.  At the bottom, tab the Build number 7-8 times.  Then comes Developer options.  This option has several secret settings related to the phone.  Follow these steps  When Cone's Developer options come up, open it.  It will be found at the bottom of the phone's Settings at the top of the About phone.  Turn it ON from the top right.  Now in the Developer options, open the Select USB configuration option in the Network
Read more

Operation Safed Sagar

Image
  OPERATION SAFED SAGAR Operation Safed Sagar was the code name assigned to the Indian Air Force's strike to support  the Ground troops during Operation Vijay that was aimed to flush out Regular and Irregular troops of the  Pakistani Army from Indian Positions in the Kargil sector along the Line of Control. It was the first large scale  use of air power in the Jammu and Kashmir region since the Indo-Pakistan War of 1971. Ground Operations Initial infiltrations were noticed in Kargil in early May, 1999.  Because of the extreme winter weather in Kashmir it was common  practice for the Indian and Pakistani Army to abandon forward posts  and reoccupy them in the spring. That particular spring, the Pakistan  Army reoccupied the forward posts before the scheduled time not only  theirs but also the posts which belonged to India, in a bid to capture  Kashmir. By the second week of May, an ambush on an Indian army patrol acting on a tip- off by a local  shepherd in the Batalik sector led to
Read more